Caution - Prism FSG200 User Manual

Free standing gantry
Hide thumbs Also See for FSG200:
Table of Contents

Advertisement

Caution

Should you have any questions during assembly contact your local authorised dealer .
• Under no circumstance should the track, lift and sling(s) or entire system be put in control of a
person who has not been properly trained in the use and care of this equipment . Failure to adhere to this
warning may result in serious injury to the operator, and/or the individual being lifted/transferred .
The FSG200 and associated lift and sling(s) are not toys . Do not use them for unsafe practices . Do not allow
children to play with this equipment or any of its components .
The manufacturer's warranty is void if persons unauthorised to perform work undertake this on the FSG200 .
Check the feet are level after installation .
In places where more than one operator will be responsible for using the FSG200, associated lift and sling(s),
it is imperative that all operators be trained in its proper use .
Never expose the FSG200 directly to water . Warranty does not cover any misuse or abuse of the FSG200
To maintain optimum function, the FSG200 should be inspected and maintained on a regular basis .
Any accessories used with the FSG200 including lift and sling(s), should be checked to ensure that they are
in good working order . Check for signs of wear or fraying prior to use . Report any unusual wear or damage
immediately to your local authorised dealer .
The FSG200 and associated lift, and sling(s) are intended only for lifting and transferring of a person . The
manufacturer will not be responsible for any damage caused by the misuse, neglect or purposeful destruction
of the lift and/or its associated components .
Do not in any circumstance exceed the maximum load for this piece of equipment . Refer to the "Specifications
of the FSG200" section of this manual .
The installation of the FSG200, lift, accessories, and sling are certified to a maximum load . Do not exceed the
maximum rated load of any of the components .
Ensure that a clear space is maintained around the FSG200 . Remove all furniture and other obstacles out of
the way before performing a transfer .
The FSG200 has been designed to lift vertically at its maximum load and at maximum height . Do not attempt
to lift an individual at an angle to the track .
5

Advertisement

Table of Contents
loading

Table of Contents