Technical Information - oticon Opn S 1 miniRITE R Instructions For Use Manual

Technical information

The hearing aid contains two radio
technologies which are described
below:
The hearing aid contains a radio
transceiver using short range
magnetic induction technology
working at 3.84 MHz. The magnetic
field strength of the transmitter is
very weak and is always below
-40 dBμA/m at a 10 metre distance.
The hearing aid also contains a radio
transceiver using Bluetooth Low
Energy (BLE) and a proprietary short-
range radio technology, both working
at 2.4 GHz. The 2.4 GHz radio trans-
mitter is weak and is always below
4 dBm e.i.r.p. in total radiated power.
74 About Start-up Handling Options Tinnitus Warnings
The hearing aid complies with
international standards concerning
electromagnetic compatibility and
human exposure.
Due to the limited space available on
the hearing aid, relevant approval
markings can be found in this booklet.
Additional information can be found
in the "Technical Data sheets" on
www.oticon.global
More info
USA and Canada
The hearing aid contains a radio
module with the following
certification ID numbers:
FCC ID: U28AUMRTRC
IC: 1350B-AUMRTRC
The device complies with Part 15 of
the FCC Rules and with Industry
Canada's licence-exempt RSSs.
Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference.
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
Changes or modifications not
expressly approved by the party
responsible for compliance could void
the user's authority to operate the
equipment.
75