MULTICAL® 403
1 General information
Please read this guide carefully before mounting the energy meter.
In case of incorrect mounting, Kamstrup's guarantee obligations no longer apply.
Please note that the following installation conditions must be obeyed:
- Pressure stage:
- Pressure stage, Kamstrup
sensor pair type DS:
- Pressure stage, Kamstrup
pocket sensors type PL:
At medium temperatures above 90 °C we recommend flange sensors as well as wall-mounting of
calculator.
At medium temperatures below ambient temperature, MULTICAL® 403 must be wall mounted and
the condensation-proof version, type 403-T, must be used.
4
PN16/PN25, see marking. The meter marking does not apply
to enclosed accessories.
PN16
PN25
Kamstrup A/S • 55121739_A4_GB_11.2017