Cleaning And Care - Sharp Carousel R-55TS Operation Manual

Toaster oven with microwave
Table of Contents

Advertisement

C L E A N I N G A N D C A R E
Disconnect the power cord before cleaning or
leave the door open to inactivate the oven dur-
ing cleaning.
Ensure the oven is completly cool
before cleaning.
E x t e r i o r
E x t e r i o r
E x t e r i o r
E x t e r i o r
E x t e r i o r
The outside surface is painted. Clean the outside
with mild soap and water; rinse and dry with a soft
cloth.
Wipe off the dust of the ventilation openings
and power supply plug.
household or abrasive cleaner.
D o o r
D o o r
D o o r
D o o r
D o o r
Wipe the window on both sides with a damp cloth
to remove any spills or spatters. Metal parts will be
easier to maintain if wiped frequently with a damp
cloth. Avoid the use of spray and other harsh clean-
ers as they may stain, streak or dull the door sur-
face.
T o u c h C o n t r o l P a n e l
T o u c h C o n t r o l P a n e l
T o u c h C o n t r o l P a n e l
T o u c h C o n t r o l P a n e l
Wipe the panel with a cloth dampened slightly with
water only. Dry with a soft cloth. Do not scrub or
use any sort of chemical cleaners. Close door and
touch STOP/CLEAR .
I n t e r i o r
I n t e r i o r
I n t e r i o r
I n t e r i o r
I n t e r i o r
- after microwave cooking.
Cleaning is easy because little heat is generated to
the interior surfaces; therefore, there is no baking
and setting of spills or spattering. To clean the inte-
rior surfaces, wipe with a soft cloth and warm wa-
ter. DO NOT USE ABRASIVE OR HARSH CLEAN-
ERS OR SCOURING PADS. For heavier soil, use
baking soda or a mild soap; rinse thoroughly with
hot water. NEVER SPRAY OVEN CLEANERS DI-
RECTLY ONTO ANY PART OF THE OVEN.
I n t e r i o r
I n t e r i o r
I n t e r i o r
I n t e r i o r
I n t e r i o r
- after grill, bake or automatic cookings.
Spatters may occur because of moisture and grease.
Wash immediately after use with hot, soapy water.
Rinse and polish dry. Harder to remove spatters may
occur if oven is not thoroughly cleaned or if there is
long time/high temperature cooking. If so, you may
wish to purchase an oven cleaner pad with liquid
cleaner within it--not a soap filled steel pad--for use on
stainless or porcelain surfaces. Follow manufacturer's
directions carefully and be especially cautious not to
get any of the liquid cleaner in the perforations on the
wall or ceiling or any door surfaces.
Rinse thoroughly and polish dry. After cleaning the
interior thoroughly, residual grease may be removed
from the interior ducts and heater by simply operating
the oven on 400°F. for 20 minutes without food.
Ventilate the room if necessary.
Do not use any type of
W a v e g u i d e C o v e r
W a v e g u i d e C o v e r
W a v e g u i d e C o v e r
W a v e g u i d e C o v e r
W a v e g u i d e C o v e r
The waveguide cover is made from mica so requires
special care. Keep the waveguide cover clean to
assure good oven performance. Carefully wipe with
a damp cloth any food spatters from the surface of
the cover immediately after they occur. Built-up
splashes may overheat and cause smoke or possi-
bly catch fire. Do not remove the waveguide cover.
O d o r R e m o v a l
O d o r R e m o v a l
O d o r R e m o v a l
O d o r R e m o v a l
O d o r R e m o v a l
Occasionally, a cooking odor may remain in the
oven. To remove, combine 1 cup water, grated peel
and juice of 1 lemon and several whole cloves in a
2-cup glass measuring cup. Boil for several minutes
using 100% power. Allow to set in oven until cool.
Wipe interior with a soft cloth.
T u r n t a b l
T u r n t a b le e e e e / / / / / T u r n t a b l e S u p p o r t
T u r n t a b l
T u r n t a b l
T u r n t a b l
T u r n t a b l e S u p p o r t
T u r n t a b l e S u p p o r t
T u r n t a b l e S u p p o r t
T u r n t a b l e S u p p o r t
The turntable and turntable support can be removed
for easy cleaning.
fully to prevent breaking the top heater.
mild, sudsy water; for stubborn stains use a mild
cleanser and a non-abrasive scouring sponge. They
are also dishwasher-proof. Use upper rack of dish-
washer. The turntable motor shaft is not sealed, so
excess water or spills should be wiped up immedi-
ately.
22
Remove the turntable support care-
Wash them in

Advertisement

Table of Contents
loading

Table of Contents