Flight Operation - Carson EASY TYRANN HORNET 350 Instruction Manual

STEERING YOUR MODEL
CAUTION
To avoid loss of control: ALWAYS move the controls S-L-O-W-L-Y! The throttle increases/decreases the flying height your Helicopter.

FLIGHT OPERATION

Trimming the quadcopter
Already shortly before the quadcopter takes off, you can recognize
whether it wants to turn or glide in a particular direction. Correct
the deviations from the vertical ascent with the trim knob of the
turn function.
Tip of the fuselage turns to the right:
• Reduce speed and push the trim slider of the turn function on
the left remote control lever stepwise to the left.
• Push the pitch-lever forward again and check whether the
correction was sufficient, if necessary shift the trim further to
the left.
• Repeat the process until the quadcopter no longer shows a
tendency to turn to the right.
Right
rotation
Left
rotation
The control lever for Turn turns your Helicopter left/right.
Forward
The control lever for Nick turns your Helicopter forwards/
backwards.
Tip of the fuselage turns to the left:
• Proceed as described above, but push the trim slider of the turn
function stepwise to the right.
Up
Down
Backward
19 // GB