Reset; Exit - Universal Flow Monitors FlowStream FP-EF-2N-360SCFH-CO2-X1B User Manual

RESET: Reset the parameters back to the original factory settings.
The following variables will be reset to their original values:
20MA = Full-scale set at the factory
High flow alarm = 80% of FS
Low flow alarm = 20% of FS
Threshold = 20%
Moving average = 25
GAS = Air
USRFCT = 1.000
EXIT: Exit the user menu.
FPMAN-1-190214
Hold the SET button until the letters RESET will be
displayed on the LCD one by one. This will provide
a 5 second delay that is intended to prevent and
accidental reset.
Page 13