Clear" Switch; Power Activation - Patlite PHE-3FB3-RYG User Manual

2.7. "Clear" Switch

All output terminals for this product can be turned "OFF" by pushing down on the "Clear" switch.
2

2.8. Power Activation

Two options for power activation are available for this product, using the AC adapter or USB bus power.
Select among the power sources below that match your environment and turn on the power.
1. When using an AC adaptor:
Insert DC plug into the main body of this product, and insert the AC adapter into an outlet. When
power is switched on, the power LED will light up.
2. When using USB Bus Power
Insert the USB cable into main body of this products and insert the top of the USB cable into the PC
which has compatible bus power. When power is switched on, the power LED will light up.
①AC Adaptor
• Do not disconnect and re-insert the DC plug while the AC adaptor is plugged in. Possible electric shock
• Do not touch the electric socket with wet hands. Failure to comply will result in electric shock.
• When plugging the AC Adaptor into the power receptacle, be sure to check there is no dust
• Depending on the capacity of the power supply for the PC or Main Unit USB port, operation may
• Use this product by connecting it directly, do not use a USB hub. Failure to do so may cause unstable
MEMO
12
and damage may occur.
accumulation on the plug, and be sure to insert it into the power receptacle completely. By allowing
dust to adhere to the AC Adaptor plug, it can result in fire or failure from short-circuiting.
become unstable. Use an AC Adaptor if this occurs.
operation.
• When operating with USB bus power, the LED units get dark.
②USB Cable
Power supply LED
Warning
Caution