Table of Contents
Advertisement
2.
Product Installation
• This product is designed for indoor use. Use this product in a location where it is not exposed to
rain and water. Exposure to rain and water may result in failure and electric shock.
• Install this product where the surface is stable and level. If this product is installed in an unstable
location or on an incline, the product may fall, resulting in damage.
• When installing this product, avoid installating it in the following places:
■ Where it's exposed to direct sunlight
■ Where high temperatures are present, such as near fire, or in a humid place
■ Where drastic temperature and humidiy changes are present
■ Where it's exposed to an environment with poor ventillation
■ Where it's exposed to vibrations exceeding the specifications
■ Where it's exposed to corrosive gas
■ Where it's exposed to a salty air environment
■ Where it's exposed to dust, iron powder, etc.
■ Where it's exposed to high concentrations of chemicals or oil mist
■ Where it's exposed to rain, or other types of wet environments
2.1. Rubber Feet Installation
Prior to the installation of this product, attach the enclosed rubber feet (four pieces) to the bottom surface of this
product.
Caution
Main Unit
Peel off the release paper
and attach to the four corners
Rubber Feet (four pieces)
2
7
Advertisement
Table of Contents
