About Led Unit And Buzzer Unit; How To Attach And Detach Led Unit And Buzzer Unit - Patlite PHE-3FB3-RYG User Manual

Please paste Tint Film by the following procedure.

6.3. About LED Unit and Buzzer Unit

To purchase the LED unit and buzzer unit, please purchase the LR type LED unit and buzzer unit shown in the
table below.
6.3.1.

How to attach and detach LED Unit and Buzzer Unit

To rearrange the arrangement of the LED units, etc., perform the following procedure.
・ The maximum number of attachment units per product are three LED units and one buzzer unit. Do not
attach more units.
・ Do not attach same color LED units to one product at the same time.
・ Do not remove the body from the main body. Failure to comply may result in failure to this product.
・Be sure the power is disconnected before working on this product.
①Peel off the release paper (2 places)
of double-sided tape
Table 6.3 LED Unit and Buzzer Unit List
Parts
LED Unit red
LED Unit Amber
LED Unit Green
BUzzer Unit
②Wrap
③Paste
(Partly overlap)
Model
LR4-E-RZ
LR4-E-YZ
LR4-E-GZ
LR4-BW
Warning
④Finish
5
27