All manuals and user guides at all-guides.com
CLT2415 ENG-6/20
6/20/01
ADDITIONAL
Installing the belt clip
To attach the belt clip
Insert the belt clip into the holes on
each side of the handset. Press down
until it clicks.
Note:
If you have wall-mounted the base,
you must install the belt clip to hold
the handset in the proper charging
position. Do not hang the handset
with the display facing inside.
Headset installation
Your phone may be used with an optional
headset. To use this feature, simply plug a
standard shielded headset with a 2.5-mm plug
into the headset jack. Your phone is ready for
hands-free conversation.
Note:
Not all headsets are the same. Some headsets may
lower volume levels or performance of the phone.
E38
19:07
Page 38
INFORMATION
To remove the belt clip
Insert a standard flat head screwdriver
into a notch of the belt clip, then remove
the belt clip as shown below.
headset
jack