Table of Contents
Advertisement
All manuals and user guides at all-guides.com
CLT2415 ENG-6/20
6/20/01
DIRECTORY
7
Use the number keys, REDIAL/PAUSE or DELETE to edit the phone number.
The phone number cannot exceed 20 digits. (See page E18.)
When the phone number will not be edited, skip this step.
8
Press SELECT/SCAN.
The handset beeps and displays the confirmation
screen. The memory storage is complete.
For example, if you store a name and number into
memory location number 02, the display shows
Memory02 stored
After about 2 seconds,
is displayed.
9
Press MEMORY or place the handset on the base to return to standby mode.
Notes:
• If no key is pressed within 20 seconds, an error tone sounds and the telephone returns to
the standby mode.
• If you receive an incoming call or page, the operation is cancelled and the telephone is set
to receive the incoming call or page.
Display a programmed number
Use
and
number display.
Name display
Memory Store
01 SANYO
02 Alison McNab
• When the stored phone number has 14 or more digits, " \" is displayed next to
the 12th digit.
Press
to see the extra digits and
Memory Store
06 011813554329
07
E24
19:07
Page 24
.
Memory Store
to switch between the name display and the
Number display
Memory Store
01 9057609944
02 5452930
Memory Store
300000
Memory02 Stored
Memory Store
01 SANYO
02 Alison McNab
to return.
Advertisement
Table of Contents
