Sanyo CLT-2415 Instruction Manual page 22

All manuals and user guides at all-guides.com
CLT2415 ENG-6/20 6/20/01
DIRECTORY
5
Press SELECT/SCAN.
Store Number
The cursor flashes indicating that
you can now enter the number.
6
Use the number keypad or REDIAL/PAUSE
to enter the phone number.
The phone number cannot exceed 20 digits.
• Use REDIAL/PAUSE to enter a pause in the
dialing sequence. The display shows a
Note:
The pause feature is useful for long distance calling, credit card dialing, or
sequences that require a pause between certain digits.
• Use DELETE to delete digits as needed.
• Press and hold DELETE to delete digits all together.
7
Press SELECT/SCAN.
The handset beeps and displays the
confirmation screen.
Memory storage is complete.
For example, if you store a name and
number into memory location number 07,
the display shows
After about 2 seconds,
is displayed.
8
Press MEMORY to return to standby mode.
Notes:
• If no key is pressed within 20 seconds, an error tone sounds and the telephone returns to
the standby mode.
• If you receive an incoming call or page, the operation is cancelled and the telephone is set
to receive the incoming call or page.
E18
19:07 Page 18
is displayed.
P
.
Memory07 Stored
.
Memory Store
Store Number
Store Number
9057609944
Memory07 Stored
Memory Store
07 SANYO
08