Advertisement
Note:This step requires 2 or more professional to finish.
Step 6: Adjust the TV angle and manage the wire
Check and tighten all screws you can use handle (2) to adjust tilt angle . Please tighten (2) when
Step 8: Tilt
the screen is in a desired angle. Please manage the wire to avoid damage by TV when
You may also want to tilt your display forwards or backwards, this is made
turning and fix the wire clip with the wire tie according to the length of the wire.
possible by loosening the plastic wing nut on the back of the Connecting Plate
Note: Please manage the TV wire and do not twist the wire on the turning area of TV.
(D). Once you have your display in the desired position re-tighten the wing-nut.
When fixing the wire clip, please be sure the TV can extend the farmost distance from the wall.
Step 9: Horizontal leveling of your display.
Final step is to check every screw to verify that they have been tightened
and are secure.
©2014 Metra Electronics Corporation, 460 Walker Street, Holly Hill, FL 32117-2699
All trademarks are the property of their respective owners.
Note: Please manage the TV cables so that they do not twist or get
pinched by the mount.
When fitting a wire clip be sure that your display is at full extension from
the wall.
©2016 Metra Electronics Corporation, 460 Walker Street, Holly Hill, FL 32117-2699
Specifications are subject to change without notice.
All trademarks are the property of their respective owners.
1-866-839-9187 • www.metrahometheater.com
Specifications are subject to change without notice.
1-866-839-9187
figure 11
+5°
-15°
5
Advertisement
