Download Print this page

Safety Warning - Helios FML64PL Assembly Instructions Manual

Advertisement

Safety Warning

Thank you for selecting the Helios FML64PL for your installation.
Before starting your installation please read and understand all of the
directions.
If you are unsure or have any doubts about the installation please contact
an installation professional or Helios customer support.
• Check the packing list and boxed products carefully to verify
that there are no missing and/or damaged parts.
• Never use damaged or incorrect parts to do your installation as
that may cause property damage or personal injury.
• Our customer service can quickly assist you with installation
questions or parts request.
• Do not use the Helios FML 64PL for any purpose other than
that specified by Helios. Helios is not liable for damage or injury
caused by incorrect assembly, mounting or use.
Installation and Mounting Directions
Safety Directions:
Step 1: Read manual completely and understand all of the
directions prior to starting the installation.
Step 1
Use FML64PL only as described in the directions.
Step 2
Step 2:
Disconnect the Connecting Plate (D) from the articulated arm by
Step 3
removing the screws at the bottom rear of the Connecting Plate (D) next
lift the Connecting Plate (D) up and away from the articulated arm.
Then remove the Slide Plate (E) from the Wall Plate (A) by loosing the
two bottom screws and lifting the Slide Plate (E) up and away from the
Wall Plate (A).
Assembly Hareware:
1 - washer
2 - square head
4pcs
screw
Hardware for TV assembly:
Helios customer support:
Hours: Monday – Friday, 9 AM to 7 PM
a-
b-
bolt
Phone Number: (866) 839-9187
4pcs
4pcs
Email: support@audiosolutions.com
g-
h-
washer
washer
4pcs
4pcs
Read and understand all the directions,handle and use according to the dire
strictly.
Remove the screws 5 to separate it into two parts.
As per different VESA size to choose the suitable unit to assemble them.
option 1 VESA size:75*75mm,100*100mm.
option 2 VESA size:(200-400)*600mm.
Instruction:Attach connecting plate (D) to arm (C) using 4 ,slide
TV bracket (B) onto (C).(figure 2).
Figure 3
3 - concrete
4pcs
bolt
c-
bolt
bolt
4pcs
i-
spacer
4pcs
D
E
2
4 -
8pcs
4pcs
d-
e-
bolt
4pcs
4pcs
j-
k-
wrench
wrench
1pcs
1pcs
4
figure 2
bolt
f-
bolt
bolt
4pcs
4

Advertisement

loading