Advertisement
Installation and Mounting Directions
Step 3: Mount the Wall Plate (A) to the wall.
Drywall with Stud mounting: The Wall Plate (A) must be mounted directly
to two wood studs with a minimum distance of 16" between the studs. Once
you have located the correct studs and height for the installation, hold the
Wall Plate (A) in position against the wall, verify with a level and mark the bolt
location for each stud (Figure 1). Next drill 1/8" diameter, 1.25" deep hole at the
four marked locations. Attach the Wall Plate (A) onto the wall with the supplied
lags bolts, level and tighten the lags until Wall Plate (A) is secured.
Concrete Block & Brick mounting: The Wall Plate (A) must be mounted directly
to Solid Concrete, Concrete Block or Brick. Do NOT mount to Mortar joints
：Read manual completely and understand all of the directions prior to starting the installation.
or hollow wall sections. Once you have located the correct location for the
mber) only as described in the directions. .
installation, hold the Wall Plate (A) in position against the wall, verify with a level
and mark the bolt location for each lag. Next drill 3/16" diameter, 1.25" deep
hole at the four marked locations. Using 3/16" x 1.25" Hex Head Concrete screws
attach the Wall Plate (A) onto the wall with the supplied lags bolts, level and
tighten the lags until Wall Plate (A) is secured.
Note: Be sure to choose a high quality wall area and enough strong to hold the
weight of the TV and wall mount itself. The assembly place should be far
away from water and sunshine
Figure 1(keep the wall plate level)
Hollow wall or decorative cardboard
3
Attention
Figure 2
Forbidden
Figure 3
Advertisement
