Advertisement
Step 5 ： Attach TV connecting unit to TV.
Installation and Mounting Directions
Step 4: Attaching Mount to your display
There are two methods for attaching the mount system to your display. Which
method that you select will be determined by your display.
Method #1 is for displays with a VESA pattern of 75mm x 75mm or 100mm x
100mm or 200mm x 200mm
Method #2 is for displays with a VESA pattern of from 400mm x 400mm up to
and including 400mm x 600mm.
Method #1: Place your display face down on a soft surface.
Select the screws from the included hardware that are correct for your display
then locate the Connecting Plate (A) over the VESA screw receptacles on the
back of your display and secure the Connecting Plate (A) to your display.
Please use the correct screw and washer for the holes on the back of your
display, using the incorrect screw will cause damage to the display.
Note that uneven assembly will cause a slanted screen.
Method #2: Place your display face down on a soft surface. Slide the two TV
Bracket Arms (B) over the two Fixed Arms © and then mount the Connecting
Plate (D) to the correct screw receptacle's and secure.
Option 1 VESA:75*75mm,100*100mm.
Unit 1 Lay TV face down,choose the suitable hareware and
TV .Pls keep the TV level(figure 6).
Option 2 VESA:200*200mm,600*400mm.
Unit 2 Lay TV face down,fix (D) onto (B),and then slide (
correct screws to fix them on the back of TV(figure 7).
Unit 1
Note
Note:
1.Pls use the corresponding screw&washer for the holes
screw & washer will damage the holes on the TV back,uneven
screen.
2.Professional Knowledge required to assemble the flat p
figure 6
figure 8
4
figure 7
Advertisement
