Siemens S7-1500 Function Manual page 60

Folders and files on the SIMATIC memory card
The following folders and files can be found on the SIMATIC memory card:
Table 4- 1
Folder
FWUPDATE.S7S
SIMATIC.S7S
SIMATIC.HMI
DataLogs*
Recipes*
UserFiles*
Backups
* The content of these folders is also loaded into the STEP 7 project with the "Upload device as new
station" function.
Table 4- 2
File type
S7_JOB.S7S
SIMATIC.HMI\Backup\*.psb
SIMATICHMI_Backups_DMS.
bin
__LOG__
crdinfo.bin
DUMP.S7S
*.pdf, *.txt, *.csv, etc.
Structure and Use of the CPU Memory
Function Manual, 10/2018, A5E03461664-AC
Folder structure
Description
Firmware update files for CPU and I/O modules
User program, i.e. all blocks (OBs, FCs, FBs, DBs) and system
blocks, project data of the CPU
HMI-relevant data
DataLog files
Recipe files
You have to manually create the folder named "UserFiles" on the
memory card for your user data. Only files in this folder (*.pdf, *.txt,
*.csv, etc) are also loaded into the STEP 7 project with the "Upload
device as new station" function.
Files for backing up and restoring via the display
File structure
Description
Job file
Panel backup files
Protected file (necessary for use of panel backup files in STEP 7)
Protected system file (necessary for use of card)
Protected system file (necessary for use of card)
Service data file
Additional file with different formats that you can also store in folders
of the SIMATIC memory card
If you store the files in the "UserFiles" folder, the files are stored in
the STEP 7 project with "Upload device as new station" and can be
used, for example, for restoring files in the event of a defective
SIMATIC memory card.
SIMATIC memory card
4.1 SIMATIC memory card - Overview
59