Ardo CALYPSO Instructions For Use Manual page 74

Summary of test for Electromagnetic Compatibility
The test of electromagnetic compatibility according to IEC / EN 60601-1-2 for the Calypso breastpump has shown that in the
intended use no endangering of the functional safety or a failure of the breastpump due to electromagnetic influences are to
be expected.
The breastpump uses RF-energy exclusively for its internal function. Its RF-transmission is therefore very small, and it is
therefore unlikely that adjacent electronic equipment will be affected.
Since the propagation of electromagnetic variables is affected by absorptions and reflections from structures and/or by
objects and people, the following must be observed.
The Calypso breastpump should not be operated at a short distance from other equipment. Do not place
any other equipment on the breastpump housing.
If it must operate at a short distance from other equipment, the equipment should be observed to verify
its proper function.
Mobile radio equipment or mobile phones should not be used at a short distance from the breastpump or
its mains power cable.
Interference may occur in the vicinity of equipment marked with the symbol opposite.
Manufacturer's declaration - Electromagnetic Emissions and Immunity
Electromagnetic Compatibility (EMC, IEC 60601-1-2, Table 1)
Electromagnetic Emissions
Calypso is intended for use in the electromagnetic environment specified below.
The customer or the user of Calypso should assure that it is used in such environment.
Emission Tests
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
74
Compliance level
Group 1
Class B
Class A
Complies
Electromagnetic environment - guidance
Calypso uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference with nearby electronic equipment.
Calypso is suitable for use in all establishments, including
domestic establishments and those directly connected to the
public low-voltage power supply network that supplies build-
ings used for domestic purposes.