Ardo CALYPSO Manual

CALYPSO
ASSEMBLING THE PUMPSET
1) Attach the white lip valve,
by holding it on its side, to the
base of the breast shell.
NB please do not use a cleaning
brush on the lip valves
4) Line up the mark on the lid
with the mark on the breast
shell and gently turn the lid half
a centimetre to close.
Ardo medical Ltd. T +44 (0)1823 336362
Visit www.ardomedical.co.uk or www.ardobreastpumps.co.uk
2) Take the breast shell and
screw it onto the bottle.
5) Double Pumping - attach
two tubes to the connector.
Single Pumping - attach one
tube to the connector and
ensure the other stopper is
closed.
3) Place the flexible membrane
pot, smooth side out, in the top
of the breast shell and press
down firmly.
6) Insert the tube connector
into the pump and you are now
ready to start expressing.