Advertisement
Installing and Changing Spray Tips
Spray tips have 4-- or 5--digit numbers on them.
The first two digits are the spray angle. Tip
holding holes are provided on the chassis.
NOTE: The chemical injector tip is brass and has a large opening and a black plastic cap.
.
1
Perform Pressure Relief Procedure (page 7).
.
2
Point the gun and wand away from you and anyone else.
.
3
Without holding your hand over the spray tip (A), pull back the
quick coupler ring (B). Remove the current tip, install a differ-
ent one. Then push the ring back on.
To avoid blowing the O-ring out of the quick coupler due to the high pressure in the system, never operate
the pressure washer without a tip securely mounted in the quick coupler.
Spray Tip
Number
00XXX
15XXX
25XXX
40XXX
Chemical
CAUTION
Spray Pattern Fan Angle
0_ blaster (red)
15_ (yellow)
25_ (green)
40_ (white)
XX_ (black)
B
A
13
309368
Advertisement
