Table of Contents
Advertisement
(Control Panel)
From the control panel each power outlet for that device can be customized.
Hit the apply button
after the changes have been made.
To turn on or off the outlet select On or Off and then hit the apply button to activate the
command.
System Configuration
Configure the system configuration page is where the device will be setup.
RF Setup
To connect the 9268M (Master) to the 9268-PR (Slave) devices follow the following
directions:
Setup the 9268-PR (Slave device)
1.) Hold the
"reset"
for the 9268-PR for more than 5 seconds until you hear a "beep"
"beep" sound.
- 21 -
Advertisement
Table of Contents
Need help?
Do you have a question about the IP Power 9268 and is the answer not in the manual?