Aviosys IP Power 9268 User Manual page 10

The Reset button is used to setup the RF device. Please go to (RF Connection Setup) for more
instructions
4.) Link
The link will show if the IP Power 9268-PR (Slave) is connected to the 9268-M (Master) device
Rear View
1.) Output Ports
Connect the devices that need to be controlled in the Output Ports.
2.) Input Power
The Input Power allows the 9268-PR to power up the devices.
3.) Surge Protector
In the case of a power surge, the fuse in located in the Surge protector.
4.) Power Switch
Power switch turns on or/off the IP Power 9268
- 10 -