Table of Contents
Advertisement
KATflow 230
Quick start wizard
On
Off
On
Off
On
Off
Displays whether flow is laminar, turbulent or mixed
"L", "T" or "LT"
4.4 Quick setup wizard
The quick setup wizard allows for a speedy setup of the most important parameters
in order to achieve successful measurements in the shortest possible time:
Display screen
RTC operating
RTC failure
Error recorded in error log
No error detected
Serial output RS 232 switched on
Serial output RS 232 switched off
Operation
The main menu is displayed after first power
on and the boot-up sequence.
Use <UP> and <DOWN> cursor keys to select
Quick start. Confirm by pressing <ENTER>.
Use cursor keys to select Setup Wizard. Con-
firm by pressing <ENTER>.
If sensors are recognised, the serial number
will be shown. If not recognised or not connec-
ted, they may be selected from a list.
Select units of measurement using cursor keys
and pressing <ENTER>.
Choose pipe material using cursor keys and
pressing <ENTER>.
4 Operation
23
Advertisement
Table of Contents
