FourStar 11226136A Assembly Instructions

MODEL: 11226136A
5 TIER SQUARE
TOWER
STEP 1
3
STEP 4
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS. CARE
SHOULD BE TAKEN IN THE UNPACKING AND ASSEMBLY OF THE
PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO THE
PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
Do you have any questions? Missing small parts or hardware? If you need assistance with the
assembly of your 5 TIER SHELF please e-mail our Customer Service Department at:
support@fourstari.com or call us at (508) 473-7688, (800) 639-3803
or visit www.fourstari.com
Please include the following information when contacting us:
• Where item was purchased
• Item, model, style or SKU number listed on instructions or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster.
STEP 2
3
A
Unfinished surface
STEP 5
PARTS LIST AND HARDWARE
NO HARDWARE & PARTS LIST
SQUARE LONG POLE
1
2 SQUARE LEG
3 INSERT CAP
a c
b
SAFETY NO-TIP
4
WALL ATTACHMENTS
1
1
1
1
A
Unfinished surface
Finished surface
A
loading for
3kgs(6.6 LBS.)
or less
loading for
3kgs(6.6 LBS.)
or less
loading for
3kgs(6.6 LBS.)
or less
loading for
3kgs(6.6 LBS.)
or less
loading for
3kgs(6.6 LBS.)
or less
QTY NO HARDWARE & PARTS LIST QTY
16 PCS A TOP PANEL 1 PC
SHELF/BOTTOM
4 PCS B 4 PCS
PANEL
4 PCS
2SETS
STEP 3
B
1
B
1
B
1
B
A
IF NECESSARY, PLEASE FOLLOW BELOW
STEP 6
INSTRUCTION TO PREVENT THE SHELF FROM TIPPING OVER.
HARDWARE PART LIST
WALL PLUG
1/4"
DRILL BIT
If necessary, the cable ties
may be attached to the wall
using wall plug, eyelet screw
to help prevent the product
from tipping.
wall
A
1
B
1
B
1
B
1
B
2
Unfinished surface
Unfinished surface
Unfinished surface
Unfinished surface
Unfinished surface
QTY
2 SETS
WALL
EYELET SCREW CABLE TIE
WALL PLUG EYELET SCREW
CABLE TIE