Installation And Operating Instructions - REO 32734 User And Operational Manual

Research Electro-Optics (REO) certifies that our laser heads and lab power supplies meet the
appropriate CE requirements. For the CE regulations to be met, all lab power supplies must be
used with an input line cord with a length of less than 3 meters.
The below symbol on the product or on its packaging indicates that this product must not be
disposed of with regular waste. It is the user responsibility to dispose of waste equipment
according to the local laws. The separate collection and recycling of the waste equipment at the
time of disposal will help to conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment. For further information about where the user
can drop off the waste equipment for recycling, please email REO at:

INSTALLATION AND OPERATING INSTRUCTIONS

The cylindrical construction of the laser head allows for easy mounting in ring clamps, V-blocks,
or similar mounting hardware without affecting the laser's alignment. Use caution when clamping
onto the laser as too much pressure can damage the aluminum housing or cause misalignment.
The front bezel has four each 4-40 Unified National Coarse Thread (UNC) holes to secure an
optional accessory mounting ring. The ring (part number 30646), which is available for purchase
from Research Electro-Optics, has 1" diameter, 32 threads-per-inch (TPI) female threads.
henelaser@reoinc.com
REF-176
.
7