Advertisement
2.
Once the update file is detected on the USB drive, the Update Available status will be displayed in the upper, right corner of the
main panel display.
Note: The Raven OS update will be copied to the device. The USB flash drive may be removed as soon as the Update Available is
displayed in the status area. The update still may be performed any time after the flash drive has been
3.
Touch the Administrator or User panel along the top of the main panel display to expand the panel.
4.
Select the System Manager utility and touch the Software Update tab.
5.
Remove USB from the Raven Viper 4
6.
Touch the Install Update button to update the Raven OS version. The device will install the available update version and
automatically restart.
TROUBLESHOOTING
1.
Failure to Install
Attempt the installation with another USB Thumb drive
Verify the file downloaded correctly (see Verification of Download below)
VERIFICATION OF DOWNLOAD:
1.Download WinMD5Free
2.Extract the files to your desktop
3.Execute "WinMD5.exe"
4.Browse to the location and select the update file downloaded above.
5.Copy and paste the MD5sum from the table below into the Original file MD5 checksum value box:
Version: UpdateViper4_2.X.X.X.Raven.zipMD5SUM: cf23c412880e0f822dbdf5a09cded1de
6.Select Verify
If the file fails (Reports "NOT Matched!") download the file again and retest until it passes. Please take care to ensure that the file is
properly downloaded. Any interruption of the download process to the external USB device may introduce a corruption of the file that
will result in the Viper 4 not properly updating and may cause malfunction. To avoid any errors, please choose to safely remove a USB
device after the download has finished successfully.
RELEASE NOTES
See next page:
removed.
Advertisement
