Connection With Pioneer Smart Sync - Pioneer DEH-S6120BS Operation Manual

Making a connection with Pioneer Smart Sync
Pioneer Smart Sync is the application that intelligently brings
your maps, messages, and music together in the vehicle.
WARNING
Do not attempt to operate the application while driving. Make sure
to pull off the road and park your vehicle in a safe location before
attempting to use the controls on the application.
1
Enter the SYSTEM menu (refer to "About the main menu").
2
Turn the M.C. dial to select [APP CONTROL], then press to confirm.
3
Turn the M.C. dial to select one of the below.
• Select [WIRED] for the USB connection.
• Select [BLUETOOTH] for the Bluetooth connection.
4
Turn the M.C. dial to select [AUTO APP CONN], then press to confirm.
5
Turn the M.C. dial to select [ON], then press to confirm.
6
Connect this unit with the mobile device via USB or Bluetooth.
Pioneer Smart Sync on the iPhone/Android device starts
automatically.
NOTE
Regardless of whether the [AUTO APP CONN] setting is set to [ON] or [OFF], you can also perform the
following to start Pioneer Smart Sync.
− For devices other than the USB-connected Android device, press SRC/OFF to select any source and
press and hold the M.C. dial.
− For iPhone, launch Pioneer Smart Sync on the mobile device.
Preparing for the SiriusXM Satellite Radio service
1
Press SRC/OFF to select [SIRIUSXM].
2
Press / to select Channel 0.
The Radio ID appears on the display.
In addition, the Radio ID is located on the bottom of the SiriusXM Connect
Vehicle Tuner.
NOTE
The Radio ID does not include the letters I, O, S or F.
3
Activate the SiriusXM service online or by phone.
For US Subscriptions:
• Visit www.siriusxm.com/activatenow
• Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions:
• Visit www.siriusxm.ca/activatexm
• Call 1-877-438-9677
4
[SUBSCRIPTION UPDATED] appears on the display when your
SiriusXM Connect Vehicle Tuner has been subscribed successfully.
Press any key to clear the activation message.