Fi-Disk Initialization Messages - IBM Series/1 User Manual

c
c
c
FI-DISK INITIALIZATION MESSAGES
FIO03I
FIO04I
FI110A
FI120A
FI121E
FI130A
FI141 T
FI142W
FI143W
FI1S0A
FIlS1 A
Message and Explanation
PRIMARY INITIALIZATION MODE
This mode was chosen and the
given disk is to be reinitialized.
ALTERNATE SECTOR MODE
This mode was chosen and an
alternate is to be assigned to
the specified sector.
DEVICE ADDRESS=
A prompt requesting the disk device
address.
TYPE=
A prompt requesting the type of
initialization to be performed.
INV ALID TYPE - MUST BE PI OR AS
An incorrect initialization type
has been entered in the response
to TYPE= prompt.
SECTOR ADDRESS=
A prompt requesting the sector
address of the defective sector
for alternate assignment.
ALTERNATE SECTOR ALREADY ASSIGNED
An alternate sector has already
been assigned.
System Action
None.
None.
Waits for the input.
Waits for the input.
Reprompts for initialization
type via the TYPE= prompt.
Waits for input.
Program terminates.
UNABLE TO MARK DEFECTIVE ALTERNATE FOR CCCHSS ccchss
Alternate sector assignment is
unable to mark the alternate
for ccchss as defective, but a
new alternate has been assigned.
DATA RECOVERY FAILED
Data from the bad sector has not
been recovered.
ARE DEFECTIVE SECTOR FLAGS INV ALID
A prom pt requesting whether the
defective flags are invalid.
None.
None.
Waits for input.
REPLY TO DEFECTIVE FLAG PROMPT MUST BE YES OR NO
Reply to the defective flag prompt
must be YES or No. Any other
response is invalid.
Reprompts.
Your Action
None.
None.
Enter a 3-character device
address in ddd format.
Enter either PI for primary
initialization or AS for
altern a te sector assignment.
Respond to the prompt with PI for
primary initialization or AS
to assign an alternate sector.
Enter the sector address of the
defective sector in ccchss format.
Program error. Retry with a rebuilt
system. If error persists, then
perform software maintenance.
Avoid use of the sector ccchss
becuase data loss may occur.
Data from the sector reassigned
is lost.
Enter either YES or NO. YES allows
a disk with invalid sector flags to
be processed. Note. Reply YES only
if the disk cannot be initialized;
otherwise, enter NO unless the
defective sector flags have been
destroyed.
Reenter the response to the invalid
sector flag prompt as either
YES or NO.
Messages M-13