Table of Contents
Advertisement
c
c
Chapter 2. System Build and Verification
Au tomatic System Build (SB)
WHAT THIS PROGRAM DOES
HOW TO USE IT
The Automatic System Build program copies to disk the diskette shipped from IBM. A
copy of this program resides on the diskette. The layout of the diskette is shown below.
ccchss
000001
000003
001001
DISKETTE
IPL/Bootstrap
Reserved
Auto-System Build
Disk IPL/Bootstrap
Disk Loader
System Verification
Diskette IPL/Bootstrap
Storage to Printer Dump (Phase A)
Storage to Printer Dump (Phase B)
Storage to Diskette Dump (Phase A)
Storage to Diskette Dump (Phase B)
Disk Initialization
Diskette Initialization
Create HDR1
Delete HDRI
Diskette to Printer Dump
Disk to Printer Dump
Diskette to Disk Copy
Disk to Diskette Copy
Diskette Patch
Disk Patch
The loader loads the contents of the diskette to a predefined area of the disk. When the
diskette has been copied, the system is built on disk.
(1)
mount the diskette, as shipped from IBM,
(2)
set the console IPL switch to alternate, and
(3)
press the LOAD Key.
The hardware loads the bootstrap, which in turn loads the Automatic System Build
program. No further input is necessary.
The program issues this message:
SBOOOI AUTOMATIC SYSTEM BUILD STARTED
System Build and Verification
2-1
Advertisement
Table of Contents
