Example 6-1 - IBM Series/1 User Manual

EXAMPLE
c
The following example shows what happens when you apply a patch to the diskette.
Operator Station Printout Explanation
IPlOOA EXEC=
The loader issues a request for the program that
is to be executed.
TR You enter the name of the Diskette Patch utility.
TROOOI DISKETTE PATCH STARTED The Diskette Patch utility has started.
TR200APATCH AREA=
The utility issues a request for the address of
the location to be patched.
02,003003,24,08 You enter the device address, sector address,
byte displacement, and byte verification count.
TR003A INVALID DEVICE ADDRESS- The device address is incorrect.
3 DIGITS REQUIRED
TR200A PATCH AREA=
The utility reissues the prompt for the address
of the location to be patched.
002,003003,24,08 You enter the correct device address, sector
address, byte displacement, and byte verifica-
tion count.
TR10lA INY ALiO DISPLACEMENT-
The byte displacement is incorrect.
3 DIGITS REQUIRED
TR200A PATCH AREA= The utility reissues the prompt for the address
of the location to be patched.
002,003003,024,08 You enter the device address, sector address,
correct byte displacement, and byte verifica-
tion count.
TRl05A INVALID BYTE VERIFICATION The byte verification count is incorrect.
c
COUNT-3 DIGITS REQUIRED
TR200A PATCH AREA= The utility reissues the prompt for the address
of the location to be patched.
002,003003,024,008 You enter the device address, sector address,
byte displacement, and the correct byte veri-
fication count.
OOOA l23B 0101 AOOC
These are the 8 bytes req uested for verification.
TR20lA REPLACEMENT DATA=
The utility issues a req uest for you to enter a
patch or cancel this particular patch operation.
NONE
No patch is to be applied.
TROOll DISKETTE PATCH COMPLETED
The patch cycle was successfully completed.
TR200A PATCH AREA=
The utility prompts for the next patch cycle.
c
Copy, Dump and Patch Programs 6-13