Advertisement
Sensor
(Under ma�ress)
Control unit
Top crib/bed view
For babies not
yet able to crawl
4. Pass the cord(s) of the sensor pad(s) through special
openings in the holder (see illustra�on 3).
Control unit
holder
Illustra�on 3
5. A�ach end(s) of the cord(s) to the outlets marked
"SENSOR" on the back of control unit
(see illustra�on 5 and 6). When using one sensor pad,
a�ach to any "SENSOR" outlet.
PLEASE NOTE: Do not a�ach any cable to the blocked
socket, marked "DO NOT USE"
6. Should the design of the crib / bed not allow proper
installa�on with the control unit holder, please use the
op�onal hanging hook (see illustra�on 5) and hang the
control unit from the bo�om edge of the crib.
7. Press control unit holder or hanging hook firmly into
slot in back of control unit (see illustra�on 4 and 5).
8. Place ma�ress firmly on top of sensor pads. If the
ma�ress cannot be in contact with the sensor pads, or if
the bed base is so�, padded or contains springs, place
extra plywood on the bed base, place the sensor pads on
the plywood and place the ma�ress firmly on top.
User Guide
pads
Top crib/bed view
For crawling babies
Illustra�on 2
Cables
Control
Unit
Cable
Bed/Crib
base
Control unit holder
Op�onal Hanging hook
Slot
Sensor
Blocked socket
DO NOT USE
Speaker
IMPORTANT: To avoid possible danger from sensor
IMPORTANT: To avoid possible danger from sensor
cords, ensure that excess cords are pulled back under
cords, ensure that excess cords are pulled back under
the ma�ress, secured with the included cable �e and
the ma�ress, secured with the included cable �e and
are not visible or reachable.
are not visible or reachable.
2
Illustra�on 4
Cable
Slot
Sensor
Do not use
Sensor
Slot
Sensor
Do not use
Sensor
Illustra�on 5
Illustra�on 6
"Sensor"
socket
Do not use
Sensor
Opening
recess
Ba�ery
cover
Advertisement
