Inspect The Equipment; Store The Equipment; Discard The Equipment; Troubleshooting - Welch Allyn Connex ECG Module Directions For Use Manual

26 Maintenance
5. Before you turn on the ECG module again, wait at least 10 minutes for all traces of
liquid to evaporate.

Inspect the equipment

Perform the following inspections daily:
• Check for cracks or breaks in the ECG patient cable, the USB cable, and the ECG
module housing.
• Check for bent or missing pins on all cables.
• Check all cable and cord connections; reseat if any connectors are loose.

Store the equipment

When storing the ECG module, cords, and accessories, observe the environmental
storage conditions that are identified in the product specifications.

Discard the equipment

Discard the ECG module, cables, and accessories according to local laws.

Troubleshooting

See the Welch Allyn Connex® Devices directions for use for troubleshooting
information.
Do not dispose of this product as unsorted municipal waste. Prepare this product for reuse or
separate collection as specified by Directive 2002/96/EC of the European parliament and the
Council of the European Union on Waste Electronic and Electrical Equipment (WEEE). If this
product is contaminated, this directive does not apply. For more specific disposal information,
see www.welchallyn.com/weee.
®
Welch Allyn Connex Devices ECG Module