Table of Contents
Advertisement
WiFi Module
9.2.1.2
Information about DHCP server activity can be accessed by selecting the DHCP status
item. The DHCP server provides automatic configuration of devices connected to the net-
work managed by the router. The DHCP server assigns an IP address, netmask, default
gateway (IP address of router) and DNS server (IP address of router) to each device.
The following table lists description of lines that are displayed in the
for each configuration.
Table 25: Information
Item
about lease address
lease
starts
ends
hardware ethernet
uid
client-hostname
Figure 28: WiFi DHCP
status
9.2.1.3
If you want to scan neighboring WiFi networks, press Scan item. Scanning can be per-
formed if the access point (WiFi AP) is off.
Table 26: Information
Item
about neighboring
WiFi networks
BSS
TSF
freq
beacon interval
capability
signal
last seen
SSID
Supported rates
DS Parameter set
36
DHCP
Desciption
Assigned IP address
Time of assignation of IP address
Time of termination IP address validity
Hardware MAC (unique) address
Unique ID
Computer name
Scan
Desciption
MAC address of access point (AP).
A Timing Synchronization Function (TSF) keeps the timers for all sta-
tions in the same Basic Service Set (BSS) synchronized. All stations
shall maintain a local TSF timer.
Frequency band of access point (AP).
Period of time synchronization [kus] (1,024ms).
List of access point (AP) characteristic.
Signal level of access point (AP).
Last response time of access point (AP).
Identifier for access point (AP).
Supported rates of access point (AP).
The channel on which broadcast access point (AP).
Wieland Electric GmbH | BA000917 | 01/2019 (Rev. B)
DHCP status
window
Advertisement
Table of Contents
