Starting Up The Device; Unpacking; Check The Delivered Contents; Preparing The Remote Control - Silvercrest KH6500-06/08-V1 Operating Instructions Manual

5. Starting Up the Device

5.1 Unpacking

1. Remove the DVD player and its accessories from
the packaging
2. Remove all adhesive tapes, foils and transport
restraints.
Attention!
Do not permit small children to play with plastic pak-
kaging. There is a risk of suffocation!

5.2 Check the delivered contents

Before puting the appliance into use, check that
all items are present and free of visible damage.
• DVD player
• Infrared remote control
• 1 Remote control battery,
3 V, Type CR2025 (Button cell)
• Audio Cinch cable with 3 Cinch plugs
• Video Cinch cable with Cinch plug and socket
• Vehicle adapter cable
• Power supply unit plug
• 1 Rechargeable battery pack
• Headphones
• Carrying case and fastening strap
• This operating manual

5.3 Preparing the remote control

Inserting the battery
For first time activation you only need to pull out
the protective foil that protudes from the battery
compartment in order to prepare the remote
control for operation.
For future battery changes proceed as follows:
1. Pull the battery compartment out of the remote
control.
2. Remove the depleted battery and insert a new
battery of the type CR2025 (Button cell) into the
battery compartment. Make sure that the battery
is inserted in accordance with its correct polarity.
3. Push the battery compartment back into the
remote control.
Using the remote control
• Point the remote control to the Infrared sensor
on the front panel of the device.
• You can use the remote control for distances
of up to approx. 8 m from the device.
- 7 -