Connections; Headphones; Use External Av Device For Playback - Silvercrest SDV-702 User Manual

• Close the compartment by pressing the cover down until it locks
in place.
• Slide the ON/OFF switch (10) to OFF position. The power
indicator (9) turns off.
Note:
• If you open the cover during playback by accident, the rotating
disc will stop.
• Do not remove the disc while it is still rotating.
11

Connections

11.1 Headphones

• Press VOLUME (4) to set the DVD player to the lowest volume.
• Connect the headphones connector to the jack (6) on the unit.
• Press VOLUME (30) to set the monitor to the lowest volume.
• Connect the headphones connector to the jack (29) on the
monitor.
Note:
• Use headphones with an angled plug if the connecting cable is
connected to the equipment at the same time.
11.2 Use external AV device for playback
• Connect, for example, a TV set
via an A/V cable (not supplied).
• Connect the video and audio
connectors to the VIDEO IN/OUT
(7) and AUDIO IN/OUT OPTICAL
OUT (8) jacks on the DVD player.
• Connect the RCA connector to the
corresponding colour-coded jacks
on your TV set.
• Select an AV channel for playback on your TV set. Read
specifics in the user manual of your TV set.
19