Siemens SITRANS P Series Operating Instructions Manual page 23

Closing the device
④⑦
1. Screw the covers
2. Secure each cover with the cover catch
①
3. Close the key cover
4. Tighten the screws in the key cover.
5. Check the tightness of the blanking plugs
①
Key cover
②
Cable gland
③
Safety catch (back)
④
Cover (rear) for electrical terminal compartment
Figure 6 View of the transmitter: Left: Back right: Front view
SITRANS P, DS III series (7MF4.33.. 7MF4.34.. 7MF4.35..)
A5E03434645-01, 08/2011
back on as far as they will go.
③⑥
.
.
⑤
and cable gland
②
in accordance with the degree of protection.
8
⑤
Blanking plug
⑥
Safety catch (front)
⑦
Cover (front), optionally with inspection window
⑧
Safety catch for stainless steel enclosure
23