Siemens SITRANS P Series Operating Instructions Manual page 22

Connecting the device
1. Lead the connecting cable through the cable gland
2. Connect the device to the plant with the protective conductor connection
3. Connect the wires to the connecting terminals
Ensure the correct polarity! If necessary, ground the device using the "-" connection by connecting the "-" connection to
⑨
the ground terminal
4. If necessary, connect the shield to the screw of the ground terminal
protective conductor connection.
HART
① Feed separator with integrated load
② Auxiliary power
③ Cable entry for auxiliary power/analog output
④
Connecting terminals
⑤ Test connector for direct current measuring
device or connection for external display
Electrical connection, power supply
22
④
.
③
.
⑦
"+" and "-".
⑨
. This is electrically connected with the external
PROFIBUS PA / Foundation™ Fieldbus FF
⑥ Safety catch
⑦ Protective conductor connection/
equipotential bonding terminal
⑧ Process connection
⑨
Ground terminal
⑩ PROFIBUS PA / Foundation™ Fieldbus FF
SITRANS P, DS III series (7MF4.33.. 7MF4.34.. 7MF4.35..)
.
A5E03434645-01, 08/2011