Cisco 7925G-EX Administration Manual page 7

Wavelink Avalanche Server
Item
WLAN Settings
SSID
WLAN Mode
Call Power Save
Mode
WLAN Security
Description
Assigns the Service Set Identifier (SSID) to this
profile. You must assign the same SSID to the
phone that is also assigned to access points in the
wireless network.
Determines the signal mode or priority for
selecting signal modes available in the WLAN.
Options are:
• 802.11 b/g: Use only 2.4 GHz band
• 802.11a: Use only 5 GHz band
• Auto, 802.11b/g preferred over 802.11a
(dual-band)
• Auto, 802.11a preferred over 802.11b/g
(dual-band)
The preferred band, if available, is used
Note
at power-on, but the phone may switch
to the less-preferred 2.4 GHz band, if
available, and the preferred band is lost.
After the phone has connected to the
less-preferred band, it does not scan for
the preferred band if the current band is
acceptable, and will remain connected
to the less-preferred band.
• Auto, signal strength (RSSI): Use strongest
signal in dual-band environment
Set for the type of power saving mode used in the
WLAN. Options are:
• U-APSD/PS-Poll
• None
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Profile Settings Fields
For more information, see ...
802.11 Standards for WLAN
Communications
802.11 Standards for WLAN
Communications
7