RF Technologies CODE ALERT Quick Response Premiere Wireless Call System Hardware Installation Manual page 6

WARNING
PRODUCT WARRANTIES—Failure to follow the Warnings and Cautions in this guide voids any and all
Product Warranties.
WARNING
STATIC DISCHARGE—Do not touch the conductor portion of any conductor or port. Damage to the
device may result.
WARNING
STRANGULATIONS AND TRIPPING HAZARD—Due to the possibility of strangulation, all cables and
cords should be routed away from the patient's throat. Cables and cords must be routed in a way to
prevent tripping hazards.
WARNING
SYSTEM INSPECTION—It is the responsibility of the facility to establish and facilitate a regular
inspection schedule for your system. RF Technologies, Inc. recommends quarterly inspections of your
system for safety and performance by a qualified RF Technologies, Inc. representative.
To arrange for a quarterly inspection by RF Technologies, Inc., call our Technical Support Department at
(800)-669-9946 or (262) 790-1771.
Failure to provide regular inspection of these products may result in equipment and/or system
failure.
WARNING
SYSTEM MAINTENANCE AND TESTING—It is the responsibility of the facility to establish and
facilitate a regular maintenance schedule for your system, as outlined in the applicable system guides. This
includes regular inspection, testing, and cleaning. RF Technologies, Inc. recommends monthly
maintenance and testing of your system. It is also recommended that your facility keep records of
maintenance and test completions.
Failure to provide regular maintenance and testing of these products may result in equipment
and/or system failure.
WARNING
SYSTEM WIRING—All permanent supply connections must be done in accordance with National
Electric Code, NFPA 70.
WARNING
Wiring shall comply with the Standard for Thermoset-Insulated Wires and Cables, UL 44, or the Standard
for Thermoplastic-Insulated Wires and Cables, UL 83.
WARNING
USER TRAINING—Only users who have received adequate training on the use of the system, as outlined
in this manual, should use the system. It is the responsibility of the facility to ensure all users have been
trained.
Failure to adequately train employees may cause system failure due to user error. In addition,
incorrect use of the equipment may also result in system failure.