Table of Contents
Advertisement
CHAPTER 1 Installing Hardware Components
Router Depth
It is important to install Routers efficiently as to minimize the number of hops to the Gateway
while still providing coverage at the furthest point from the Gateway. The Router Depth option
allows you to adjust Router Depth by staggering 5-second Router resets by one, two, three or
four minutes. Each Router has an association limit of 6 Routers; the hop limit for each Router is
4.
To select the Router Depth
1.
Select Login (or Functions if password protection is disabled).
2.
Enter your Login and Password or use your identification card.
3.
Press Enter or click OK.
4.
Select Administrative Functions.
5.
Select Configuration. The Configuration page opens with links to the Configuration
menus.
All devices recognized by the system are listed in the Configuration Device window.
6.
Select Devices.
The Configuration devices window opens.
7.
Click the Properties box next to the Router.
The Configuration Device Properties window opens.
FIGURE 1.4:
8.
Select the Router depth from the pull-down.
9.
Click Save and the Close the window.
10. Once the Router Depth is selected, you must do a rebuild the subnet on scanned devices.
(See "Rebuild Subnet on Scanned Devices" on page 30.)
Page 30 of 64
Configuration Device Properties
Quick Response Premiere Wireless Call System Hardware Installation Guide
0510-1099-E
Advertisement
Table of Contents
Need help?
Do you have a question about the CODE ALERT Quick Response Premiere Wireless Call System and is the answer not in the manual?
Questions and answers