7.
Right-click the Cluster Service.
8.
Select the Properties.
9.
Change the Startup type on General Tab to Disabled. Select the OK.
3.6. Stop the EXPRESSCLUSTER service
Refer the following website for more information.
http://www.nec.com/en/global/prod/expresscluster/en/support/manuals.html
-> Reference Guide
-> Chapter 10 The system maintenance information
-> Replacing the network card
* Perform the procedures prior to the replace of network card.
Shut down the system and then start up it again. After that, Go to [4 LAN driver update].
- 13 -
August 2016
855-911221-105-A