Danby Silhouette DKC646BLS Owner's Manual page 11

SETTING UP YOUR KEG COOLER
ASSEMBLY INSTRUCTIONS (CONT'D)
5. Installation of C0
2
Attach one end of the (red) air line hose to the
hose barb connection on the CO 2 regulator.
Secure hose by using one of the two (self locking)
black plastic snap on clamps provided. (use pliers
to snap the clamp tight to
leaks) See Fig. 5
6. Installation of the Beer Tower Gasket: Position
the rubber (beer tower) gasket directly on top of
the cabinet aligning all four holes in the gasket
with the four holes on the cabinet.
7. Installation of the Beer Tower: Unravel the beer
line (hose) from the tower and insert the beer
line and nut through the gasket and into the
cabinet. Align the four holes in the base of the
beer tower, gasket and bayonet. The beer faucet
should be facing the front of the cabinet. (6:00
o'clock position) Using a Phillips Screwdriver,
attach the beer tower to the cabinet using the four
machine screws provided and tighten firmly.
8 . Installation of the Beer Tower Faucet Handle:
Screw the black faucet handle (clockwise) onto
the beer tower faucet. (hand tighten only)
Fig. 5
Air Line Hose to Regulator:
ensure that there are no
9. Installation of the Keg Coupler: IMPORTANT
NOTICE; Make sure the pull handle of the
keg coupler is in the "upward" (closed) position
before installing on the beer keg. See Fig. 6 Insert
the keg coupler into the locking neck of the beer
keg and apply a 1/4 turn clockwise to lock into
position.
10. Installation of the CO
Keg Coupler: Attach the open end of the (red) air
line hose to the hose barb connection on the keg
coupler. Secure hose by using the remaining (self
locking) plastic snap on clamp provided. (use pliers
to tighten clamp and ensure there are no leaks)
11. Installation of the Beer Line Hose to the Keg
Coupler: Screw the beer line nut onto the keg
coupler and hand tighten firmly. IMPORTANT
NOTICE: The black rubber washer provided must be
installed inside the beer line connection nut before
connecting the beer line to the keg coupler.
Fig. 6
11
Air Line Hose to the
2