Assembly Instructions - Danby Silhouette DKC646BLS Owner's Manual

SETTING UP YOUR KEG COOLER
ASSEMBLY
INSTRUCTIONS
1. Installation of the Top Rail: See Fig. 1.
2. Installation of CO2 Regulator: Attach the CO2 Regulator to
the CO2 cylinder by screwing the regulator nut onto cylinder
valve and tighten (snug) using an adjustable wrench. See
Fig. 2.
IMPORTANT NOTICE: ALWAYS EXERCISE EXTREME
CAUTION WHEN HANDLING THE PRESSURIZED CO2
CYLINDERS.
3. Installation of CO2 Cylinder: Install your "fully charged"
CO2 cylinder into the support stand.
4. Installation of CO2 Cylinder Support: Align the holes in
the cylinder support stand with the studs and push down
firmly. See Fig. 3.
R
Fig. 3
10
Fig. 1
Fig. 2