National Instruments Corporation DAQCard-500 User Manual page 44

Appendix D
5. I run a memory utility, and it appears there is no memory available for Card Services.
What should I do?
You should remove your memory manager by commenting it out of the CONFIG.SYS file.
Next, you can rerun the memory utility. Memory managers often consume an enormous
amount of memory, and you will need to determine what memory is really usable by Card
Services. When you have determined what memory is available for Card Services, reinstall
your memory manager and make the necessary changes to provide Card Services with the
memory needed. We suggest that you use the minimum amount of memory for Card
Services, namely 4 to 12 KB, which frees more memory for the memory manager.
Resource Conflicts
1. How do I resolve conflicts between my memory manager and Card Services?
Card Services can usually use memory space that is not being used for real RAM on the
system. Even when this is the case, you should still exclude the memory addresses used by
Card Services from use by any memory manager that may be installed.
© National Instruments Corporation D-3
PC Card Questions and Answers
DAQCard-500 User Manual