Differences Between The Daqcard-700 And The Daqcard-500 - National Instruments Corporation DAQCard-500 User Manual

Appendix B
Differences between the DAQCard-700 and the
DAQCard-500
This appendix contains a summary of differences between the DAQCard-700 and the
DAQCard-500 that may be relevant to you if you are a current DAQCard-700 user. For a
summary of programming differences, refer to the DAQCard-500 Register-Level Programmer
Manual.
Functionality
FIFO read
FIFO buffer size
Maximum sample rate
Maximum input voltage rating
ADC calibration
Timer chip
Maximum timer source frequency
Input modes
Input ranges
© National Instruments Corporation
DAQCard-700
One, 16-bit word
512 samples
100 kS/s
±30 V
Software calibration
MSM82C54
10 MHz
Single ended, differential
±10 V, ±5 V, ±2.5 V,
Software selectable
B-1
DAQCard-500
Two, 8-bit words
16 samples
25 kS/s
±25 V
Software calibration
MSM82C54
10 MHz
Single ended
±5 V, fixed
DAQCard-500 User Manual