Download Print this page
Hide thumbs Also See for TX-1:

Advertisement

Quick Start Guide
http://www.elmosolution.co.jp/products/download/dl_shoga.html
For details about specifications and instruction manual of the product, refer
to the following official website.
contact one of our sales departments whose details are provided at the end
of this manual.
Make sure to read the
product.For details about the operations of this product, refer to the instruction manual.
http://www.elmousa.com/TX-1
http://elmoeurope.com/en/html/download/02.php
IMPORTANT SAFEGUARDS
in this guide before using this

Advertisement

loading

Summary of Contents for Elmo TX-1

  • Page 1 For details about specifications and instruction manual of the product, refer to the following official website. http://www.elmousa.com/TX-1 http://elmoeurope.com/en/html/download/02.php contact one of our sales departments whose details are provided at the end of this manual.
  • Page 6 http://www.elmo.co.jp/...
  • Page 7 http://www.elmosolution.co.jp/products/download/dl_shoga.html...
  • Page 18: Important Safeguards

    IMPORTANT SAFEGUARDS ■ Read Instructions All the safety and operating instructions should be read before the appliance is operated. ■ Retain Instructions The safety and operating instructions should be retained for future reference. ■ Heed Warnings All warnings on the product and in the operating instructions should be adhered to. ■...
  • Page 19 ■ Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
  • Page 20 ■ Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power-supply cord or plug is damaged. • If liquid has been spilled, or objects have fallen into the product. •...
  • Page 21 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude SA 1965 to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature...
  • Page 22 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment.
  • Page 23 RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
  • Page 24: Before You Use

    BEFORE YOU USE Be sure to use the power cable or AC adapter supplied with the product. Do not use them with other products. Be sure to use the AC adapter applicable to your local power specifications. If the product was sold in Japan, use the AC adapter sold with the product with 100 VAC and 50 or 60 Hz.
  • Page 25 For parts replacement (on chargeable basis), consult the dealer from whom you purchased this product or our branch/office near your location. Menus/ Icons Some functions of the TX-1 may not be set or used depending on the operation mode or menu settings. Copyright Unless used for personal use, it is prohibited strictly under copyright law to use any photo files without the prior consent of the copyright holder.
  • Page 26 It is prohibited under copyright law to use or copy any part or the whole of this document without our prior written consent. ELMO shall not be liable for any claim for damage or loss of earnings or any claim raised by a third person due to the use, malfunction or repair of this product.
  • Page 27 Handling Precautions The followings are special precautions against mishandling of the product, which may cause serious damages to the product. Pay close attention to them. Installation Carrying the product Do not place the product Carry the product by holding on an unstable base or the lower part of the main unit slanted surface.
  • Page 28 TABLE OF CONTENTS PREPARATION REQUIRED ITEMS ················································································ SETTING UP OF TX-1 ············································································ CONNECTING TO A TV MONITOR OR PROJECTOR ·································· USING TX-1 POWERING ON OFF ··········································································· ZOOMING AND FOCUSING ···································································· BRIGHTNESS ADJUSTMENT ·································································· OPERATING PANEL ·············································································· ABOUT WiFi FUNCTION ABOUT WiFi FUNCTION ············································································...
  • Page 29: Required Items

    Caution ● The supplied DC power cable (black) is designed to be used for the TX-1 only. Do not use for other purpose than connecting the the supplied AC adapter to the TX-1.
  • Page 30 SETTING UP OF TX-1 2. Rotate the camera head as shown in 1. Place the TX-1 on a stable surface. the below figure. Camera head Camera CONNECTING TO A TV MONITOR OR ROJECTOR ● Connect with a commercially available ●Connect with a commercially available...
  • Page 31: Powering On/Off

    (For Japan and North America) Connect the AC adapter to the TX-1 with the supplied AC power cable (black). Plug the end of the AC power cable into a wall outlet to power on the TX-1. (For Europe Connect the AC adapter to the TX-1 with the supplied DC power cable (black).
  • Page 32: Zooming And Focusing

    ZOOMING AND FOCUSING BRIGHTNESS ADJUSTMENT Press at the same time to return to the default setting.
  • Page 33: Operating Panel

    OPERATING PANEL Mark Function POWER To ON/OFF the power . MENU To display the OSD menu. To automatically adjust focus. IMAGE ROTATION To rotate the displayed image by 180°. LED LIGHTING To ON/OFF the lighting. BRIGHTNESS To brighten the displayed image. BRIGHTNESS To darken the displayed image.
  • Page 34 Station mode The TX-1 can be connected to the ICB or the company’s wireless system using Wireless LAN. The TX-1 can be connected to a computer using the WiFi fuction as shown below. Access point mode Station mode For details of the connection procedure or usage instructions, refer to the Instruction Manual.
  • Page 35 Set the flicker rate according to the power supply frequency being used in your area. How to set Set using the operating panel VISUAL PRESENTER are registered trademarks of ELMO Co., Ltd. Android, Google Play are the trademark or registered trademark of Google Inc. HDMi, logo, and...