Weston 05-0201 Instructions Manual page 7

5. Slide the Chute up into the Apple
Crusher Body. FIGURES 4 & 5
6. Line up Hole 1 of the Chute to Hole 1
of the Apple Crusher. Secure the Chute
to the Apple Crusher Main Body using a
Machine Screw and Wing Nut. Repeat
on the other side of the Chute. Tighten
both Wing Nuts by hand. FIGURE 6
7. When table-mounting the Crusher,
make sure the Handle can freely rotate.
A table corner is an ideal location.
8. Secure the Crusher to the table with
the two C-Clamps. FIGURE 7
Hole 1
Hole 1
FIGURE 6
FIGURE 4
FIGURE 5
FIGURE 7
7