Hf-Function Tuning In Practice - Benefon SIGMA GOLD TDP-52-SN3 Service Manual

3.3.3 HF-function tuning in practice

You can tune HF-functions two ways: manually or with car kit.
Manual tuning
1. Connect the localbox to your phone, and turn the phone on.
2. Press
*
3. Press
HF-FUNCTION
4. Choose
CAR KIT TUNING [038]. (The figure can be different).
5. Choose
CAR KIT TUNING [
6. Enter three digits and
and 043.
7. Choose
CAR KIT SWING (1...4): [3]. (The figure can be different).
8. Choose
CAR KIT SWING (1...4): [3]. (3 is blinking)
9. Enter one digit and
Tuning in car kit
Connect the localbox to your phone, and turn the phone on.
1.
2. Press
*
3. Connect the hand portable to the car kit
4. Press
HF-FUNCTION
5. Choose
CAR KIT TUNING [038]. (The figure can be different).
6. Choose
CAR KIT TUNING [
7. Drive the car so that you can get a normal back ground noise level. The
figure (026) will be changed according the back ground noice level.
8. Enter three digits (back by pressing
SAVE. The level will be stored.
6DP_52GB
and the following text will appear in the display: ***BENEFON***.
will be flashing in the display.
, and the following text will appear in the display:
SELECT, and the following text will appear in the display:
CHANGE, and the following text will appear in the display:
] (026). (The figure can be different).
SELECT, and the following text will appear in the display:
SELECT, and the following text will appear in the display:
and the following text will appear in the display: ***BENEFON***.
will be flashing in the display.
, and the following text will appear in the display:
SELECT, and the following text will appear in the display:
CHANGE, and the following text will appear in the display:
] (026). (The figure can be different).
Product: TDP-52-SN3 /
27.1.1999
SAVE. Yhe recommended value is between 033
OK.

) shown in the figure (xxx) and
11