Trouble Shooting; Specifications - Panasonic NI-WT980 Operating Instructions Manual

Trouble shooting

Problem
No heating
No steam
Poor steaming power
No spray
Water leaks from steam
vents
Clothes are marked
Specifications
Model No.
Power Source
Power Consumption
Weight (approx.)
Dimensions (approx.)
This iron is intended for household use only.
Causes, Solution
Make sure the Power Plug is plugged into a
household outlet.
Fill the Water Tank with tap water up to "MAX" dot.
If there is no steam, set the Steam/Dry
Selector to the Steam position, or set the
Power Switch to " ".
For poor steam, move the Steam/Dry Selector
several times, then reset to the Steam position.
Press the Power Shot Button several times
when the "Power Shot" appears insufficient.
Wait until the Thermostat Operating Indicator
Light goes off before using the iron.
Set the Power Switch to " ".
Push the Spray Mist Trigger several times.
Fill the Water Tank with tap water up to "MAX" dot.
Press the Power Shot Button in intervals of at
least 2 seconds when using the "Power Shot".
Wait until the Thermostat Operating Indicator
Light goes off before using the iron.
Empty the Water Tank and fill it with clean
water. There may be contaminants in the
iron/cup.
NI-WT980
120 V
1700 W 14.2 A
1.8 kg (4.0 lb)
307 mm x 141 mm x153 mm
(12.1 in. x 5.6 in. x 6.0 in.)
60 Hz
19