Dell Latitude 5424 Rugged Owner's Manual page 169

12 Remove the two 'M2*3' screws[1] on EDP bracket to remove the EDP bracket [2].
13 Disconnect the EDP cable [3] and disconnect the DC-In connector [4] from the system board.
14 Remove the two 'M2.5*5' screws and two 'M1.6*3.0' screws [1] from the USB Type-C bracket.
15 Remove the USB Type-C bracket [2] and the two cap screws in the rear I/O space [3] from the system board.
Removing and installing components 169